Why does the stone in your ring look dull?

Waarom wordt de steen in je ring dof?
Geschreven door: Sharon van het Hof

The stone in your ring usually loses its shine because of a thin layer of soap, hand cream and skin oil. That layer sits on the stone and blocks the light. Sometimes there are also fine scratches in the surface. You can remove an oily layer yourself, but scratches stay.

A ring is in the middle of the action all day long. You wash your hands, apply cream and pick up all sorts of things. In this blog you will read where that dull haze comes from, how to tell dirt from scratches and how to make your stone shine again. That way your gemstone ring stays beautiful.

Twist Ring Sodalite Silver

Twist Ring Sodalite Silver

Where does a dull stone come from?

There are three main culprits that rob a stone of its shine.

Soap and hand cream

Soap, shampoo and hand cream leave a thin, greasy film. That film also creeps under the stone, at the back of the setting. Light can then no longer enter the stone properly. As a result, it looks greyish and flat.

Skin oil and dust

Your skin produces a little oil every day. Dust sticks to it easily. After a few weeks there is a layer you only notice when you put the ring next to a clean one. It happens so gradually that many people think the stone itself has changed.

Fine scratches

Household dust contains tiny grains of quartz with a hardness of 7. Over time, a softer stone gets fine scratches from them. Together, those scratches create a matte haze. Want to know which stones resist this best? Then read more about the types of stones for rings.

Is it dirt or scratches?

A simple test quickly shows you what is going on.

The breath test

Breathe gently on the stone once. If the mist clears in patches, there is oil on it. If it clears evenly, the stone is clean and the dull look is in the surface itself.

Look under a lamp

Hold the ring at an angle under a lamp or by the window. Scratches show up as thin, shiny lines that move with the light. An oily layer looks more like an even, milky haze. On a stone with a faceted top, a scratch stands out even more, because the small facets reflect the light so sharply.

Edge Ring Sunstone Silver

Edge Ring Sunstone Silver

Which stones lose their shine faster?

Not every stone reacts the same way to daily wear.

Softer stones

Sodalite scores around 5.5 to 6 on the Mohs scale. Sunstone and labradorite sit around 6 to 6.5. These stones are beautiful, but they lose their high polish faster than a stone from the quartz family. That is why it is best to wear them on your less active hand.

Opaque stones

An opaque stone, such as onyx or sodalite, lets little light through. So you mainly see the shine of the surface. An oily layer makes such a stone look matte faster than a clear stone, which glows from within. With a hardness of around 6.5 to 7, onyx is nice and sturdy though.

The metal around it

Sometimes the stone looks dull, while it is actually the metal that has lost its shine. Silver reacts with sulphur in the air and develops a dark haze. The silver rings in this collection are made of 925 sterling silver with a rhodium plated finish, and that layer slows down tarnishing. Also read about the difference between 925 and 999 silver if you want to know why a ring is never made of pure silver. Gold tarnishes much less. The 9K gold rings are made of solid 9 carat gold, and the workshop makes them by hand.

Edge Ring Onyx Gold

Edge Ring Onyx Gold

How do you make your stone sparkle again?

With a few simple steps your ring will shine like before.

Start with a dry, soft cloth

Gently wipe the stone and the band with a dry, soft cloth. Also rub along the edges of the setting, because that is where most dirt collects. Is the layer stubborn? Then dampen the cloth very lightly with lukewarm water and pat the ring dry afterwards.

What to avoid

Do not use toothpaste, silver dip or abrasive cleaners. They remove not only dirt, but also part of the finish. An ultrasonic cleaner is too harsh for many softer stones. So keep it simple and gentle.

Everyday habits

Take your ring off when you wash your hands or apply cream. Wait until the cream has soaked in and then put it back on. Store your ring separately in a pouch so it does not get scratched by other jewellery. Notice that the stone also moves slightly? Then read what to do when a stone threatens to fall out of your ring.

With every design, the founder of the brand pays attention to three things: quality, comfort and timeless design. A ring should look just as beautiful five years from now. With a little care, you achieve that with a softer stone too.

Frequently asked questions about a dull stone in your ring

I'm happy to answer a few frequently asked questions:

Does sunlight make a stone lose its shine?

No, the shine stays. Some stones, such as amethyst, do fade in a lot of bright sunlight. So do not leave your ring on the windowsill.

Can a gemstone ring go in silver polish?

Better not. Silver polish is meant for bare silver and affects the rhodium plated finish and a soft stone.

Can a jeweller remove scratches from a stone?

Polishing sometimes works on a hard stone. On a small or soft stone it is often not worth it.

How often should you clean your ring?

Wipe it with a dry cloth after every wear. A thorough clean once a month is then enough.

Want to know more, or have questions? The experts at Sparkling Jewels are happy to help.