Yes, a stone can sometimes fall out of a ring. Usually this happens after a hard knock, a bent prong or a setting that has loosened slightly over the years. With a good setting and a few simple habits, the risk is small. On top of that, you often see the warning signs well in advance.
A ring goes everywhere your hands go. You grab your bag, you cycle and you do the dishes. In this blog you will read how a stone is held in place, why it sometimes comes loose and what to do if it happens anyway. That way you wear your gemstone rings with peace of mind.

How is a stone actually held in a ring?
Goldsmiths have a few standard ways of setting a stone in a ring.
A rim around the stone
In this setting, a thin rim of metal sits tightly around the whole stone. The goldsmith presses the rim down so the stone can no longer slide out. This is also called a bezel setting. The Edge rings have a firm rim like this around a rectangular stone with a faceted top.
Prongs like tiny fingers
Prongs are thin metal claws. They bend over the edge of the stone and hold it in place. This lets lots of light into the stone, so it sparkles even more. The downside is that a prong bends open slightly after many knocks.
Small stones in a row
In a ring with a row of small stones, each stone sits in its own little hole. Tiny beads of metal hold it in place. It looks delicate and refined. Those tiny beads are the first to wear down, especially on the palm side of your hand.
Why does a stone come loose?
A loose stone almost always has a clear cause.
A hard knock or blow
Most stones come loose after one solid knock. Think of a door frame, a bike lock or a dumbbell at the gym. The metal then bends open by a fraction. The stone still sits in place, but with less grip. After a few days you notice it moves a little.
Wear from daily use
Silver and gold are soft metals. When you wear a ring for years, the metal wears down very slowly, including at the rim or the prongs. It happens so gradually that you hardly notice it yourself. That is why a quick check now and then is a smart idea.
A soft stone that chips
Sometimes the setting is still fine, but the stone itself is damaged. A softer stone gets a small chip on the edge after a knock. As a result, it fits less tightly in the setting. In the blog about which gemstones are suitable for a ring, you will read which stones handle a knock well.

How do you notice that a stone is loose?
A simple ten second check already tells you a lot.
Listen and feel
Hold your ring close to your ear and tap it gently with your fingernail. If you hear a faint click or rattle, the stone is moving. Also run your fingertip over the rim. If your jumper or tights catch on the ring, a prong is often sticking out.
Look for gaps
Turn the ring under a lamp and look at it from the side. If you see light between the metal and the stone, it is no longer tight. Cubic zirconia is very sturdy with a hardness of around 8 to 8.5. Still, even this stone only stays put when the setting closes properly. Curious how cubic zirconia compares to a diamond? Then read more about the difference between cubic zirconia and diamond.
What do you do if your stone is loose or falls out?
Acting quickly stops you from losing the stone altogether.
Stop wearing it straight away
If the stone moves, put the ring in a box or pouch right away. Only wear it again once it has been checked. If the stone has already fallen out, keep it separately in a small bag. A loose stone can often go straight back into its setting.
Have the ring checked
A jeweller checks the setting and presses the rim or prongs back into place. Have you only had the ring for a short time? Then contact the shop where you bought it first. You get a 2 year warranty on manufacturing defects, but damage from a fall or a hard knock is not covered. Sparkling Jewels works with more than 500 jewellers across Europe, so there may well be a stockist near you.

How do you stop a stone from coming loose?
A few simple habits already make a big difference.
Take your ring off for heavy tasks
Going to the gym, gardening or carrying shopping? Put your ring aside for a moment. Also take it off when cleaning, because cleaning products affect the finish. You will find more tips in the blog about cleaning and caring for your jewellery.
Choose a setting that suits your day
Do you work with your hands a lot? Then choose a ring with a firm rim around the stone. It absorbs most of the knocks. The founder of the brand visits the workshops in Italy, Bangkok and Hong Kong herself and checks every detail there, from the clasp to the setting of a stone. A quick check of your ring once a month does the rest.
Frequently asked questions about a loose stone in your ring
I'm happy to answer a few frequently asked questions:
Does a stone fall out of a silver ring more often than a gold ring?
Not necessarily. Both metals are soft and wear slowly. It mainly depends on the setting and on how you wear the ring.
Should you glue a loose stone back yourself?
Better not. Glue often leaves a residue and makes it harder for the jeweller to reset the stone neatly.
How often should you have a gemstone ring checked?
If you wear it every day, have it checked about once a year. If you spot a gap sooner, go straight away.
Does a stone come loose faster when your hands are cold?
No. Cold makes your fingers shrink a little, so the ring sits looser. The stone stays just as secure, but your ring slips off your finger more easily.
Want to know more, or have questions? The experts at Sparkling Jewels are happy to help.