Cleaning a beaded bracelet requires a different approach than cleaning a smooth link bracelet. It has dozens of beads with just as many seams, and elastic runs between them that cannot withstand everything.
With the right method, you’ll be done in ten minutes and the bracelet will last for years longer.

Saturn Bracelet Large Ruby Quartz
Where exactly does the dirt collect?
Not on the beads themselves, but in the seams between them. At every transition from one bead to the next, a narrow groove forms where skin oils, body lotion and dust collect.
With a bracelet made of 4-millimetre beads, you are talking about forty-five beads and therefore forty-five of these grooves. That explains why a bracelet can look dull even when each individual bead still shines.
The second problem area is the drill hole. Dirt accumulates there, where normal wiping never reaches.
The method that works
Lay the bracelet flat in a shallow bowl of lukewarm water with one drop of mild soap. Laying it flat is important, because this ensures that the elastic is not under tension anywhere.
Leave it to soak for no more than a minute. Soaking it for longer allows water to penetrate the elastic, weakening the material.
Then take a soft toothbrush and move it along the bracelet lengthwise, following the row of beads. This allows you to reach every seam. Brushing across the bracelet instead pushes dirt further into the groove.
Turn the beads as you go
This is the step most people skip. Turn each bead a quarter turn while brushing.
This brings the underside of the bead to the top—the part that rests against your wrist and is usually the dirtiest. Do this carefully, without pulling on the bracelet.

Interstellar Bracelet Smoky Quartz
Drying is the most important step
Rinse with lukewarm water and pat the bracelet dry with a soft cloth. Then comes the patient part.
Lay the bracelet flat on a towel and leave it for at least a few hours, preferably overnight. Water between the beads and inside the drill holes evaporates slowly and can otherwise remain trapped.
Do not use a hairdryer or place the bracelet on a radiator. Heat greatly accelerates the ageing of elastic, as explained in why an elastic beaded bracelet stretches.
What you should never use
Ultrasonic cleaners are out of the question. The vibrations can loosen beads from their thread and greatly accelerate wear on the elastic.
Leave silver dip baths and polishing products aside as well. These chemicals can damage the stones’ polished surface and penetrate the elastic.
The same applies to toothpaste, baking soda and scouring pads. They are mildly abrasive and can leave fine scratches on the polished bead surface.
What about the silver?
The bracelets are made from 925 sterling silver. Silver reacts with sulphur compounds in the air and in perspiration, causing a dark tarnish to form.
For this, use a dry silver-polishing cloth and touch only the metal parts. Keep away from the stones themselves.
Prevention works better: store the bracelet somewhere dry and separately. Explore the beaded bracelet collection to see which components are included in your model.

Saturn Bracelet Small Pink Opalite
How often should you do this?
If you wear it every day, clean it every four to six weeks. In between, simply wipe the bracelet with a dry cloth after taking it off; this cuts the work in half.
If you only wear it occasionally, two to three times a year is sufficient. Take it off around water and soap, as described in can a beaded bracelet withstand water.
Frequently asked questions
Here are answers to some frequently asked questions:
Can I use washing-up liquid?
A neutral washing-up liquid is fine, provided it is highly diluted and used very briefly. Avoid varieties containing bleach or limescale remover.
My bracelet is still dull after cleaning. What now?
The dirt is probably inside the drill holes, or the polished surface has worn away. A jeweller can polish the beads again if needed.
Can I use alcohol to disinfect it?
It is better not to. Alcohol dries out elastic and can damage the finish of some stones.
Why are some beads duller than others?
They were probably on the underside against your skin. Turn the beads while cleaning and the difference will disappear.
Can a pearl bracelet be cleaned in the same way?
No, you need to be much more careful with it. Pearl is porous and soft. Simply wipe it with a slightly damp, soft cloth—without soap.
Would you like to know more or do you have further questions? The experts at Sparkling Jewels will be happy to help.