Can a beaded bracelet get wet?

Kan een kralen armband tegen water?
Geschreven door: Sharon van het Hof

Washing your hands while wearing your bracelet is no problem. Spending an afternoon in the pool is. The difference is not in the water itself, but in what it contains and how long it remains in contact with your bracelet.

Below, you can read what happens in each situation, so you can make the decision yourself.

Saturn Bracelet Small Ruby Quartz

Saturn Bracelet Small Ruby Quartz

Clean water does little harm to the stones

Most gemstone beads are varieties of quartz with a hardness of 7 on the Mohs scale. Quartz does not dissolve in water or absorb it.

Brief contact with tap water therefore does not damage the stone. Washing your hands or walking through the rain for a while is perfectly fine.

The vulnerable parts are elsewhere: the elastic, the silver components and the finish. These three determine what is and is not advisable.

Why soap is the real problem

Soap is alkaline and acts as a degreaser. That is exactly what makes it problematic for jewellery.

Soap residue builds up between the beads and around the drill holes, where rinsing does not remove it. A dull, greyish film then forms, taking away the jewellery's shine.

Soap also penetrates the elastic and causes the material to weaken more quickly. Shower gel and shampoo do the same and also contain plenty of fragrance and silicone.

Chlorine is the biggest culprit

Pool water contains chlorine compounds that actively react with metal. Silver reacts with them and discolours, while the finish wears noticeably faster.

With a beaded bracelet, there is also the elastic to consider. Chlorine attacks the molecules that give the material its resilience, causing the bracelet to become loose or break sooner.

Swimming once is not a disaster. Swimming laps every week while wearing your bracelet will make a visible difference within a single season.

Saturn Bracelet Large Smoky Quartz

Saturn Bracelet Large Smoky Quartz

Seawater combines all the risks

Salt accelerates metal corrosion and gets into every crevice. When it dries, it leaves crystals behind that act as an abrasive between the bead and the cord.

Then there is the sand. Sand consists largely of quartz with a hardness of 7, so it can easily scratch most gemstone beads.

Finally, there is the sun. Rose quartz and amethyst fade under prolonged exposure to UV light, making the beach the least favourable place for jewellery.

Which stones are especially sensitive?

Pearl

Pearl is porous and scores only 2.5 to 4.5 on the Mohs scale. Soap, sweat and chlorine damage its surface and make it dull.

So always remove a pearl bracelet before coming into contact with water. This is not excessive caution; it is genuinely necessary.

Porous and treated stones

Turquoise, howlite and dyed materials absorb moisture. With dyed stones, the colour can visibly run.

Enamel and glued components

Warm water makes glue expand, while cold water causes it to contract again. Over time, this change can cause glued parts to come loose.

What should you do if your bracelet gets wet?

Rinse it with lukewarm tap water to remove salt or chlorine. Do this as soon as possible, as dried residue is more difficult to remove.

Then pat the bracelet dry with a soft cloth and leave it flat to dry for a few hours. Moisture between the beads evaporates slowly.

Do not use a hairdryer. The heat accelerates the ageing of the elastic, as explained in why an elastic beaded bracelet stretches.

Limited Mom Bracelet Pearl Enamel

Limited Mom Bracelet Pearl Enamel

The practical rule of thumb

Remove your bracelet before showering, swimming, exercising and cleaning. This covers virtually all risky moments in an ordinary week.

Washing your hands while wearing the bracelet is fine, as long as you dry it afterwards. Browse the beaded bracelet collection to see which materials are used in your model.

Frequently asked questions

Here are answers to some frequently asked questions:

Can I wear my beaded bracelet in the sauna?

Preferably not. The combination of heat and moisture is the most unfavourable scenario for elastic and glued components.

What does sweat do to the bracelet?

Sweat contains salts and acids that tarnish silver and weaken elastic. Therefore, remove the bracelet when exercising.

Can I wear it in the rain?

Yes. Rainwater is clean and contact is brief. Do dry the bracelet afterwards.

Why does my bracelet smell musty?

There is probably moisture between the beads and the elastic. Leave the bracelet flat in a dry place until the smell disappears.

Does rinsing after swimming really help?

Yes, and it makes a significant difference. Chlorine that you rinse away immediately does not have time to take effect.

Would you like to know more or do you have any questions? The experts at Sparkling Jewels will be happy to help.