You unpack your new labradorite piece of jewellery and the stone looks mostly grey. In the product photo, it lit up bright blue. What is going on?
Usually, there is nothing wrong. Labradorite behaves differently from a stone with a fixed colour, and that difference is easy to explain.
The colour is not in the stone, but in the light
This is the key point. With amethyst or rose quartz, the colour is part of the material itself. The stone is purple or pink wherever you stand.
Labradorite works differently. The colour is created when light is reflected between extremely thin layers inside the stone and interferes there. It is therefore an optical effect, not pigment.
Such an effect requires the right conditions. If the light hits at the wrong angle, nothing happens and you simply see the grey base colour. Read how labradorite forms to learn how these layers develop.

Gemstone Large Leaf Labradorite Earring
Four reasons why your stone shows less colour
Below, we explain four reasons:
The viewing angle is not right
This explains by far the most cases. Slowly tilt the stone under a lamp and look for the angle at which the colour appears.
With most stones, this window is quite narrow, sometimes only ten to twenty degrees wide. Outside that window, the stone remains grey. That is normal behaviour.
The light is too diffuse
Labradorescence, as it is called, requires directed light. Direct sunlight and a single lamp work best.
Indoors on a cloudy day, or under even ceiling lighting, light comes from all directions at once. The effect then becomes much weaker. Product photos are taken under directed studio lights, which largely explains the difference.
The cutting direction was unfavourable
The layers should lie roughly parallel to the surface. If the cutter cut through them at an angle, the effect will be weaker, no matter how good the rough block was.
So the same block can produce both bright and dull stones. This is why beads within a bracelet differ from one another.

Gemstone Medium Oval Labradorite Earring
There is a layer of dirt on the surface
Skin oils, body lotion and hairspray create a matte film that scatters the light before it enters the stone. This largely hides the effect.
Fortunately, this is easy to solve. Lukewarm water, a drop of mild soap and a soft cloth will usually restore the shine completely.
How to get the most out of your stone
Stand by a window or under a single lamp. Move your wrist or slowly turn your head, and watch for the moment when the colour appears.
Then consciously wear the stone somewhere that moves a lot. Earrings and bracelets therefore catch constantly changing light, while a pendant hangs more still against your chest.
Your clothing also matters. A blue or green flash stands out more against a dark background than against white. Read which colours go well with labradorite to learn more.
When is something actually wrong?
If the stone shows no colour at any angle, even in direct sunlight, the material is weak. In that case, please contact customer service.
Also look out for blotchy, dull areas that were not there before. This points to a damaged polished surface or a flake along a cleavage plane. Read more in why labradorite breaks along a straight line.
Also discover our labradorite collection to explore our beautiful labradorite jewellery!

Gemstone Blossom Labradorite Earring
Frequently asked questions
Here are answers to some frequently asked questions:
Why does the colour differ from the product photo?
Every natural stone differs in pattern and intensity, and studio lighting enhances the effect. Two stones from the same batch will never look exactly alike.
Does the play of colour disappear over time?
No. The effect is part of the crystal structure and does not wear away. Only a damaged or dirty surface layer makes it temporarily less visible.
Does a larger stone automatically show more colour?
Not automatically. A larger surface provides more opportunity for colour, but only if the layers maintain the same direction across the entire surface.
Does polishing help?
Yes, if the surface has become dull. A jeweller can restore the smooth surface layer, allowing the light to enter unobstructed again.
Why do beads within the same bracelet differ?
Each bead comes from a different piece of rough material with its own layer direction. This difference is part of natural stone and is not a defect.
Want to know more, or do you have further questions? The experts at Sparkling Jewels will be happy to help.