Why do my bracelets get tangled?

Waarom raken mijn armbanden in elkaar verstrikt?
Geschreven door: Sharon van het Hof

Your bracelets get tangled because they move against each other and get caught somewhere. A thin chain between thicker bracelets, a clasp with an open ring or a setting with edges especially tends to grab another bracelet. You prevent it by wearing bracelets of similar thickness side by side, placing chain bracelets on the outside and taking your stack off in a fixed order.

A bracelet stack looks gorgeous. But at the end of the day there is sometimes a knot in it. Or a fine chain has wrapped itself around a beaded bracelet. That costs you time and sometimes your jewellery too. Below you will read why it happens and what helps.

How do bracelets get tangled?

There are three causes that come up almost every time.

Difference in thickness

A thin bracelet easily slides under or over a thick one. Then it twists halfway around it. After a few movements, a loop has formed. Bracelets of similar thickness, on the other hand, lie calmly side by side. They keep each other in place.

Hooks and edges

A clasp with an open ring works like a small hook. It catches another bracelet when you turn your wrist. The settings of a tennis bracelet also have small edges. A thin chain easily gets stuck there.

Turning around your wrist

Every bracelet turns a little. One piece turns faster than another. That difference in pace makes the bracelets roll over each other. It all has to do with the weight of bracelets and where the clasp sits.

Saturn Bracelet Small Smoky Quartz

Saturn Bracelet Small Smoky Quartz

How do you wear a stack that does not tangle?

The order of your bracelets matters at least as much as the choice of bracelets.

Choose a solid base

Start with two or three stretch beaded bracelets with the same bead size. The Saturn Bracelet Small Smoky Quartz has 4 mm beads. According to the product page, the gold coloured version is gold filled with a gold plated finish. Bracelets like these form a sturdy block together. You will find a step by step plan for that base in how to create the perfect bracelet stack.

Put chain bracelets on the outside

Do you wear a chain bracelet or a tennis bracelet? Then place it at the edge of your stack. Preferably on the side of your hand. That way it does not sit between two bracelets and has nothing to catch on.

Keep thin chains separate

A very thin chain is pretty, but tangles the fastest. Wear it on its own on your other wrist. Or place it at the very end of your stack, against your forearm.

Interstellar Bracelet Multi Gem - Spice

Interstellar Bracelet Multi Gem - Spice

Which combinations stay the neatest?

Some combinations simply work better in practice than others.

Beads next to beads

Two beaded bracelets side by side almost never tangle. There are no hooks and no open links. The Interstellar Bracelet Multi Gem in the colour Spice has fine 3 mm beads in different natural stones. It looks lovely next to a bracelet with 4 mm beads. The small difference in size adds a playful touch and the block stays stable.

Beads next to a bangle

A bangle is smooth and has no links. It does slide along your beads, but it does not catch on them. Still, place a bangle on the outside. Then it will not roll in between two bracelets.

Switch colours and stones

With the Mix & Match concept, you can switch colours and stones endlessly. Founder Sharon van het Hof created it together with Ton Tijhuis. The idea: everything goes together, so you decide your own look. A warm tiger eye bracelet, for example, pairs well with a smoky quartz bracelet. See all the options in the beaded bracelets collection.

Reverse Universe Bracelet Tiger Eye

Reverse Universe Bracelet Tiger Eye

How do you safely untangle bracelets?

If it has happened anyway, take a moment and work calmly.

Take them off first

Do not try to undo a knot on your wrist. Take the bracelets off first and lay them flat on a table. That way you can see exactly where the loop is. Never pull hard on a stretch bracelet, or the elastic will stretch out.

Use a pin

Is a thin chain stuck in a tight knot? Then use a pin or a needle. Gently loosen the knot from the middle. The chain will often slide free on its own after that.

Store them separately

Do not throw your bracelets in a pile after wearing them. Store beaded bracelets flat side by side and keep chains separate. The silver version of the Reverse Universe Bracelet Tiger Eye is made of 925 sterling silver with a rhodium plated finish. Ideally keep silver in a pouch or box so it stays beautiful. When Sharon visits the workshops in Italy, Bangkok and Hong Kong, she also tests the materials herself. In her view, a piece of jewellery should last a long time, and storing it well is part of that.

Besides tangled bracelets, do you also struggle with a big bead that slides down? Then read how to keep the big bead of your bracelet on top. And if a bracelet pulls at your wrist, take a look at bracelets that pull your hairs.

Frequently asked questions about tangled bracelets

I'm happy to answer a few frequently asked questions:

How many bracelets should I wear at once?

Three to five bracelets work best for most wrists. More bracelets mean more movement and so more chance of a knot.

Does a stretch bracelet tangle too?

Almost never with other beaded bracelets. A thin chain can wrap itself around a beaded bracelet, though.

Does it help to spread bracelets over two wrists?

Yes. Fewer bracelets per wrist means less movement. For example, wear your chain bracelets on the left and your beaded bracelets on the right.

Can a knot damage my chain?

A tight knot can bend a link if you pull hard on it. So always undo it calmly.

Why does my stack mostly tangle in the evening?

After a whole day of movement, your stack has often shifted a little. The bracelets have rolled over each other. Straighten them now and then, and everything stays neater.

Want to know more, or have questions? The experts at Sparkling Jewels are happy to help.