How do you clean rose quartz jewellery?

Hoe maak je rose quartz sieraden schoon?
Geschreven door: Sharon van het Hof

A rose quartz piece of jewellery that looks dull is usually not worn out. There is simply a layer of skin oil, body lotion and hairspray on the stone that blocks the light.

You can remove that layer in five minutes. However, the method requires more care than with a smooth silver link, because the stone and the wire each need a different approach.

Cushion Cut Rose Quartz Gemstone Earring

Cushion Cut Rose Quartz Gemstone Earring

How to clean rose quartz step by step

Fill a small bowl with lukewarm water and add a drop of mild soap. Hand soap without abrasive ingredients or a neutral dishwashing liquid works perfectly well. Avoid hot water, as temperature shocks put stress on both the stone and the adhesive in a setting.

Briefly submerge the jewellery, for no more than a minute. Then take a soft toothbrush and gently brush along the edges of the stone and around the setting. This is where dirt accumulates fastest.

Rinse with lukewarm water and pat the jewellery dry with a soft cloth. Then leave it on a towel for another half hour so that any water between the beads can evaporate as well.

Why is drying so important?

Residual moisture seeps into the drill holes of beads and between the wire. Over time, this causes tarnishing and weakens the elastic.

The beaded bracelets are made with 925 sterling silver. Silver reacts with sulphur compounds in the air and moisture, causing dark tarnish. Storing it dry significantly slows this process.

What should you absolutely avoid?

Do not use silver polish or a dip bath on jewellery containing stones. These products contain harsh chemicals that can damage the polished surface of rose quartz and dissolve adhesive in a setting.

Also avoid vinegar, bleach, acetone and alcohol. They dull the surface and seep into the microcracks found in virtually every natural stone.

Scouring pads and toothpaste should also be avoided for the same reason. Rose quartz scores 7 on the Mohs scale, but abrasive particles can still leave fine scratches on the polished surface.

Bold Mix Rose Quartz Bracelet

Bold Mix Rose Quartz Bracelet

Can you use an ultrasonic cleaner?

Absolutely not for a beaded bracelet. An ultrasonic device sends high-frequency vibrations through the water. These vibrations loosen beads from their wire and greatly accelerate wear on the elastic.

Stones with inclusions are also at risk. Rose quartz naturally contains fibres and microcracks, and vibrations act precisely on these weak points. An existing hairline crack can then develop into a visible fracture.

For a smooth silver link without stones, such a device is suitable. In that case, remove the stone pendant first.

How should you care for a beaded bracelet?

The wire deserves extra attention, as it is usually the first component to fail. Never roll the bracelet over your hand; instead, slide it on gently with a little room to spare. The standard length is 18 centimetres.

When cleaning it, lay the bracelet flat rather than stretching it. Also avoid soaking it for a long time, as water softens the wire.

The beaded bracelets come with a ten-year warranty. The individual silver beads themselves have a lifetime warranty. So if you are unsure, feel free to contact customer service.

Prevention works better than polishing

Put jewellery on last

Apply perfume, hairspray and body lotion first and let them absorb. Only then put on your jewellery. This prevents a greasy film from settling on the stone.

Take it off before showering, swimming and exercising

Chlorine, seawater and soap can damage the finish of the setting. Sweat contains salts that have the same effect. So take off your jewellery before going to the pool or gym.

Store everything separately and in the dark

Loose jewellery stored in the same pouch rubs against each other and causes scratches. A compartment or soft pouch for each piece solves this problem.

Storing it in the dark has a second advantage. Rose quartz slowly fades under UV light, as explained in does rose quartz fade in the sun.

Reverse Universe Rose Quartz Bracelet

Reverse Universe Rose Quartz Bracelet

How often should you clean jewellery?

If you wear a bracelet every day, a thorough cleaning every four to six weeks is sufficient. In between, simply wipe it with a dry, soft cloth after taking it off.

Earrings and pendants have less contact with skin oil and therefore need attention less often. Cleaning them two to three times a year will keep them looking beautiful. Browse the complete rose quartz collection to see which pieces you wear most.

If you would like to know how to combine those pieces thoughtfully, read which jewellery to combine with rose quartz.

Frequently asked questions

Here are answers to some frequently asked questions:

Can rose quartz be left in water?

Briefly submerging it is fine. I advise against soaking it for a long time, especially with bracelets made with threaded wire or a glued setting.

How can I remove tarnish from the silver without touching the stone?

Use a dry silver-polishing cloth and work only on the metal. Keep the cloth away from the stone itself.

Why has my bracelet become dull?

Usually, there is a layer of skin oil and lotion on it. Cleaning it with lukewarm water and mild soap will almost always restore its shine.

What should I do if a bracelet breaks?

Carefully store all the beads in a pouch and contact customer service. The beaded bracelets come with a ten-year warranty, so always have the situation assessed.

Does baking soda help remove tarnish?

It does work on silver, but it is mildly abrasive. It is therefore better not to use it on jewellery containing stones.

Would you like to know more, or do you have any questions? The experts at Sparkling Jewels will be happy to help.