You see a bright pink bracelet online for a few euros and immediately start to wonder. Is it still real stone, or simply dyed glass? It is a valid question, because the market is full of materials that look identical in a photograph.
Fortunately, genuine rose quartz reveals itself through a few characteristics that are easy to check at home. You do not need a laboratory—just daylight and a little patience.

Saturn Bracelet Large Rose Quartz
Look at the colour first
Genuine rose quartz has a muted, slightly greyish pink hue. The colour looks almost powdery and never bright. If you see neon pink or vivid pink, it is almost certainly dyed material or glass.
Also check whether the colour runs throughout the stone. In dyed stones, the pigment is only present in the outer layer and in cracks. Turn the stone over and look at the drill hole of a bead: you can often see a dark edge there if the stone has been dyed.
Look at the cloudiness
This characteristic reveals imitation most quickly. Rose quartz contains microscopic, fibrous inclusions that scatter light. As a result, the stone looks milky and is never completely transparent.
Glass, on the other hand, is crystal clear or contains air bubbles. Hold the stone up to a lamp and look for round bubbles. If you find them, you are holding glass.
Genuine stones, by contrast, show cloudy patches, veils and sometimes fine white streaks. This irregularity is not a flaw, but rather evidence that the stone formed naturally.
Does the stone feel cool?
Hold the stone against your wrist or cheek for a moment. Quartz conducts heat better than plastic, so it feels noticeably cool. That coolness also lasts for a few seconds.
Plastic and resin absorb your body heat almost immediately. If the stone warms up within two seconds, something is probably not right.
Glass also feels cool, however, so this test alone is never conclusive. Always combine it with the other characteristics.

Cushion Cut Pendant Rose Quartz
Test the hardness carefully
Rose quartz scores 7 on the Mohs scale. A steel knife is around 5.5, and glass is around 5.5 to 6. If you run a steel point over an inconspicuous corner and it does not leave a scratch, that points towards genuine quartz.
Only perform this test on the underside or inside of a bead. Testing a visible surface causes unnecessary damage, even if the stone turns out to be genuine.
The test also works the other way around. Genuine rose quartz can scratch a piece of glass. Plastic and resin, by contrast, will not leave any mark.
Look at the price and the source
Rose quartz is not a rare stone, so it is affordable. However, cutting, shaping and polishing genuine stone takes time and craftsmanship. A complete bracelet made from genuine gemstone beads for two euros simply does not exist.
Also ask what type of setting a brand uses. With jewellery based on 925 sterling silver, a manufacturer generally also pays attention to the quality of the stone itself. For comparison, view the rose quartz collection.
Which materials look most like rose quartz?
Pink opalite tops that list. It is man-made glass with an opal-like glow and looks remarkably similar to rose quartz in photographs. You can read about the difference in the article on rose quartz and pink opalite.
There is also a lot of dyed clear quartz and dyed howlite in circulation. Howlite is porous and readily absorbs dye, causing the colour to visibly fade after a few months of wear.
Does genuine rose quartz fade too?
Yes, and that can be confusing. Genuine rose quartz slowly loses colour when exposed to strong sunlight for long periods. That does not make it fake, as it is a known characteristic of the stone.
The difference lies in the speed and pattern. Dyed material discolours unevenly within weeks, while genuine stone fades evenly over a period of years. You can read more about this in does rose quartz fade in the sun.

Frequently asked questions
Here are some frequently asked questions:
Are all the stones in a bracelet the same if the stone is genuine?
No, quite the opposite. Small colour differences between beads point to natural material. Perfectly identical beads often indicate glass or resin made in a mould.
Does a UV lamp help with identification?
Only to a limited extent. Rose quartz usually shows no strong reaction under UV light. Some dyed stones do glow brightly, which can provide an indication but is not proof.
What does the weight tell you?
Quartz has a specific gravity of around 2.65. As a result, genuine stone feels heavier than plastic of the same size. Glass has a similar weight to quartz, so this mainly distinguishes stone from plastic.
Can a jeweller determine it with certainty?
Yes. A gemmologist measures the refractive index and examines the inclusions under a microscope. This provides certainty that you cannot achieve at home.
Does a drill hole with an edge always indicate dye?
Usually, but not always. A dark edge can sometimes also be caused by adhesive residue from the assembly. Check several beads: if it appears on all of them, that points towards dye.
Would you like to know more or do you still have questions? The experts at Sparkling Jewels will be happy to help.